ProQual Level 3 Diploma in Fabricating Steel Structures in Construction Course in Islamabad|| Registration Open
Registration Open= +92-3315999937, +92- 3215056755 (WhatsApp Only)
Introduction
The ProQual Level 3 Diploma in Fabricating Steel Structures Construction qualification
provides a nationally recognised qualification for those working in this specialised area of
construction.
The awarding body for this qualification is ProQual Awarding Body (www.proqualab.com)
and the regulatory body is the Office of Qualifications and Examinations Regulation (Ofqual).
The qualification has been accredited onto the Regulated Qualifications Framework (RQF)
and is published on Ofqual’s Register of Qualifications.
Qualification Profile
Level 3 Diploma Fabricating Steel Structures in
Construction
Qualification title ProQual Level 3 Diploma in Fabricating Steel Structures in
Construction
Ofqual qualification number 603/3163/X
Level 3
Total Qualification Time 520 hours (375 GLH)
Assessment
Pass or fail
Internally assessed and verified by centre staff
External quality assurance by ProQual verifiers
Qualification start date 16/4/2018
Qualification end date
Entry Requirements
There are no formal entry requirements for this qualification.
Centres should carry out an initial assessment of candidate skills and knowledge to identify
any gaps and help plan the assessment.
ProQual, April 2018
Level 3 Diploma in Fabricating Steel Structures in Construction
4
Qualification Structure
To achieve the qualification candidates must complete ALL of the Mandatory units,
candidates may also complete the Additional unit.
Mandatory Units
Unit Ref. Title Level GLH
Y/616/6182 Contribute to effecting working relationships in construction 2 15
D/616/6183 Work safely and minimise risk in construction 2 20
H/616/6184 Identify and deal with hazards and emergencies in a
construction environment
3 30
M/616/9735 Shape components of fabricated steel structures by material
removal using hand tools in construction
3 100
T/616/9736 Assemble components of steel fabrications to meet
specification in construction
3 120
A/616/9737 Manually form components to specification in construction 3 90
Additional Unit
Unit Ref. Title Level GLH
F/616/9738 Join materials by manually controlled welding process in
construction
3 160
Centre Requirements
Centres must be approved to offer this qualification. If your centre is not approved please
complete and submit form ProQual Additional Qualification Approval Application.
Staff
Staff delivering this qualification must be appropriately qualified and/or occupationally
competent.
Assessors/Internal Quality Assurance
Assessors for each unit must have verifiable, current industry experience and a sufficient
depth of relevant occupational expertise and knowledge, and must use a combination of
assessment methods.
Assessors and internal quality assurance verifiers for competence-based units or
qualifications will normally need to hold appropriate assessor or internal quality assurance
qualifications.
ProQual, April 2018
Level 3 Diploma in Fabricating Steel Structures in Construction
5
Support for Candidates
Materials produced by centres to support candidates should:
- enable them to track their achievements as they progress through the learning
outcomes and assessment criteria;
- provide information on where ProQual’s policies and procedures can be viewed;
- provide a means of enabling Internal and External Quality Assurance staff to
authenticate evidence
Assessment
This qualification is competence-based, candidates must demonstrate the level of
competence described in the units. Assessment is the process of measuring a candidate’s
skill, knowledge and understanding against the standards set in the qualification.
The qualifications must be assessed in a work environment and it must be internally
assessed by an appropriately experienced and qualified assessor.
Each candidate is required to produce a portfolio of evidence which demonstrates their
achievement of all of the learning outcomes and assessment criteria for each unit.
Evidence can include: – observation report by assessor
– assignments/projects/reports
– professional discussion
– witness testimony
– candidate product
– worksheets
– record of oral and written questioning
– Recognition of Prior Learning
Learning outcomes set out what a candidate is expected to know, understand or be able to
do.
Assessment criteria specify the standard a candidate must meet to show the learning
outcome has been achieved.
Learning outcomes and assessment criteria can be found from page 7.
Internal Quality Assurance
An internal quality assurance verifier confirms that assessment decisions made in centres
are made by competent and qualified assessors, that they are the result of sound and fair
assessment practice and that they are recorded accurately and appropriately.
ProQual, April 2018
Level 3 Diploma in Fabricating Steel Structures in Construction
6
Adjustments to Assessment
Adjustments to standard assessment arrangements are made on the individual needs of
candidates. ProQual’s Reasonable Adjustments Policy and Special Consideration Policy sets
out the steps to follow when implementing reasonable adjustments and special
considerations and the service that ProQual provides for some of these arrangements.
Centres should contact ProQual for further information or queries about the contents of the
policy.
Results Enquiries and Appeals
All enquiries relating to assessment or other decisions should be dealt with by centres, with
reference to ProQual’s Enquiries and Appeals Procedures.
Certification
Candidates who achieve the requirements for this qualification will be awarded:
- A certificate listing all units achieved, and
- A certificate giving the full qualification title –
ProQual Level 3 Diploma in Fabricating Steel Structures in Construction
Claiming certificates
Centres may claim certificates for candidates who have been registered with ProQual and
who have successfully achieved the qualification. All certificates will be issued to the centre
for successful candidates.
Unit certificates
If a candidate does not achieve all of the units required for a qualification, the centre may
claim a unit certificate for the candidate which will list all of the units achieved.
Replacement certificates
If a replacement certificate is required a request must be made to ProQual in writing.
Replacement certificates are labelled as such and are only provided when the claim has
been authenticated. Refer to the Fee Schedule for details of charges for replacement
certificates.
ProQual, April 2018
Level 3 Diploma in Fabricating Steel Structures in Construction
7
Learning Outcomes and Assessment Criteria
Unit Y/616/6182
Contribute to effective working relationships in construction
Learning Outcome – The learner
will: Assessment Criterion – The learner can:
1 Establish and maintain productive
working relationships.
1.1 Develop working relationships with different people in the
work environment such as: those for whom they are
responsible, those to whom they are responsible, clients,
colleagues, other tradespersons, suppliers, security/safety
personnel.
2 Deal with disagreements in an
amicable and constructive way so
that effective relationships are
maintained.
2.1 Accept the opinions of others in relation to work
activities.
2.2 Review different points of view on work related matters
in a positive and constructive way in order to maintain
working relationships and productivity.
2.3 Apply mediation (in accordance with the individual’s
responsibilities) in the event of disagreements between
third parties in order to maintain productive working
relationships.
3 Keep others informed about work
plans or activities which affect
them.
3.1 Use appropriate types of communication
(formal/informal, written, verbal) to clearly relay
important information to others.
4 Seek assistance from others in a
polite and courteous way without
causing undue disruption to
normal working activities.
4.1 Approach workplace colleagues / associates in an
appropriate manner and at an appropriate time, in order
to seek assistance on work related issues.
5 Respond in a timely and positive
way when others ask for help or
information.
5.1 Prioritise requests for help and information in relation to
wider work activities.
5.2 Clarify requests for help and information to identify
exactly what is required.
5.3 Ensure appropriate responses are provided within agreed
timescales.
6 Understand the importance of
creating and maintaining working
relationships.
6.1 Describe the individual’s responsibilities for creating and
maintaining working relationships and explain why it is
important to do so.
7 Understand problems affecting
relationships.
7.1 Describe different problems that can affect relationships,
and the actions that can be taken to deal with specific
difficulties.
8 Understand lines of
communication and
responsibilities.
8.1 Explain the individual’s responsibilities and the
responsibilities of others within the work location.
8.2 Describe the lines of communication that exist within the
individual’s working environment and explain the agreed
procedure for passing information.
ProQual, April 2018
Level 3 Diploma in Fabricating Steel Structures in Construction
8
Unit D/616/6183
Work safely and minimise risk in construction
Learning Outcome – The learner will: Assessment Criterion – The learner can:
1 Understand health and safety
legislation, regulations and safe
working practices and procedures.
1.1 Explain the requirements of health and safety
legislation.
1.2 Explain the consequences for employers and
employees of not fulfilling their legal health and safety
responsibilities.
1.3 Explain the purpose and nature of risk assessments,
method statements, and permit to work systems, and
the relevance of local procedures and guidance notes.
1.4 Describe reporting lines and procedures.
2 Understanding personal site safety
responsibilities.
2.1 Describe how to recognise health safety training
needs, the procedure for requesting training and who
to ask for help in understanding the work instructions.
2.2 Describe how to get information relating to the safe
use of equipment and how to ensure the equipment is
used safely.
2.3 Describe how to recognise when personal protective
equipment should be used and how to select and use
the correct equipment for the work to be undertaken.
2.4 Describe different types of vibration injuries and
explain how they can be prevented.
2.5 Explain the importance of personal behaviour in
maintaining workplace standards.
2.6 Describe the checks which are needed to make sure
that portable electrical appliances are safe to use.
2.7 Describe what a safe system for electrical isolation
should include and why low voltage is generally safer
in relation to health and safety.
2.8 Describe the risks from overhead cables and how to
control them.
2.9 Describe what must be done when carrying hazardous
substances in vehicles.
2.10 Describe where asbestos is likely to be found, what
should be done if it is thought to have been found and
how it is a risk to health.
3 Understand others site safety
responsibility.
3.1 Explain who is responsible for ensuring that
equipment is checked and safe to use.
3.2 Describe who is responsible and who must assess the
health and safety of people working on a client’s site.
3.3 Describe the legal rights and responsibilities of the
appointed safety representatives and the powers of
the regulatory inspectors.
ProQual, April 2018
Level 3 Diploma in Fabricating Steel Structures in Construction
9
Learning Outcome – The learner will: Assessment Criterion – The learner can:
4 Know first aid procedures. 4.1 Describe the first aid procedures that typically apply in
the workplace.
4.2 Describe the aspects of first aid in the workplace that
all personnel are expected to know.
5 Understand evacuation procedures. 5.1 Describe how to work safely in an excavation.
5.2 Explain procedures for shutdown and evacuation and
state where procedures can be obtained.
6 Understand contingency reporting
documentation and systems.
6.1 Describe the contingency reporting documentation
and systems that are relevant to workplace activities.
7 Understand appropriate reporting
lines and procedures.
7.1 Explain how to comply with the various reporting lines
and procedures that apply in the working
environment.
ProQual, April 2018
Level 3 Diploma in Fabricating Steel Structures in Construction
10
Unit H/616/6184
Identify and deal with hazards and emergencies in construction
Learning Outcome – The learner will: Assessment Criterion – The learner can:
1 Recognise industrial processes, tools,
equipment and materials that have the
potential to cause harm.
1.1 Identify different hazardous processes, tools,
equipment and materials which exist in the work
environment.
1.2 Identify hazardous industrial processes
associated with particular working
environments.
2 Check for and identify potential hazards in
the workplace in line with agreed and
approved procedures.
2.1 Safely check for potential hazards in accordance
with agreed and approved procedures.
2.2 Identify potential hazards in the workplace and
report in accordance with approved procedures.
2.3 Minimise potential hazards using the criteria and
procedures specified in the risk control strategy.
3 Take appropriate action to minimise the
risk from hazards and emergencies.
3.1 Take appropriate action upon identification of a
hazard or emergency.
3.2 Call for expert help using warning systems as
appropriate.
3.3 Follow shut down and evacuation procedures
promptly and correctly.
3.4 Deal safely with hazards and emergencies in
accordance with organisational policy and
procedures.
3.5 Report in accordance with the overall risk control
strategy.
4 Understand health and safety legislation,
regulations and safe working practices and
procedures.
4.1 Explain the requirements of health and safety
legislation.
4.2 Explain the purpose and nature of risk
assessments, method statements, and permit to
work systems, and the relevance of local
procedures and guidance notes.
4.3 Describe reporting lines and procedures.
5 Understand hazard spotting and safety
assessment methods and techniques.
5.1 State where information on hazard spotting and
safety assessment methods and techniques can
be found.
5.2 Describe the hazard spotting and safety
assessment methods and techniques, which
apply in the work location.
6 Understand types of hazards involving
processes, tools, equipment and materials.
6.1 Describe common types of hazard associated
with processes, tools, equipment and materials.
6.2 State what the individuals’ responsibilities are in
terms of dealing with and notifying others of
hazards.
ProQual, April 2018
Level 3 Diploma in Fabricating Steel Structures in Construction
11
Learning Outcome – The learner will: Assessment Criterion – The learner can:
7 Understand effects of hazards on persons,
property and the environment.
7.1 Describe the effects of hazards on persons,
property and the environment.
8 Understand actions to minimise risk from
hazards.
8.1 Describe the types of actions required to deal
with and minimise the risks from different
hazards.
ProQual, April 2018
Level 3 Diploma in Fabricating Steel Structures in Construction
12
Unit M/616/9735
Shape components of fabricated steel structures by material
removal using hand tools in construction
Learning Outcome – The learner will: Assessment Criterion – The learner can:
1 Work safely and minimise risk at all times 1.1 Identify a range of hazards
1.2 Take appropriate action to minimise the risk
from hazards
1.3 Refer safely related matters to appropriate
persons as required
1.4 Work in accordance with relevant health
and safety legislation
1.5 Work in accordance with the requirements
of risk assessments and permit to work
systems
2 Prepare work area, materials and
equipment
2.1 Ensure that the work environment is
suitable for the work activities to be
undertaken
2.2 Ensure that service supplies are connected
and ready for use
2.3 Ensure that consumables are as specified
and fit for purpose
2.4 Obtain and prepare the appropriate tools
and equipment and ensure they are in a safe
and useable condition
2.5 Ensure that safety arrangements are in
place to protect other workers from
activities likely to disrupt normal working
2.6 Ensure and report completion of
preparations in line with organisational
procedures
2.7 Deal promptly with problems and report
those that cannot be solved
3 Shape components of fabricated steel
structures by material removal using
hand tools
3.1 Follow relevant specifications for the
component to be produced
3.2 Shape the materials using appropriate
methods and techniques
3.3 Check that the requirements for shaping
have been achieved
3.4 Deal promptly and effectively with problems
and report those that cannot be resolved
4 Carry out the necessary actions after
completing the shaping of components
of fabricated steel structures by material
removal using hand tools
4.1 Re-instate the work area to a safe condition
and correctly dispose of waste materials
4.2 Shut down the equipment to a safe
condition on completion of steel fabrication
activities
4.3 Store re-usable materials, consumables and
equipment in accordance with appropriate
procedures
4.4 Complete all necessary documentation
ProQual, April 2018
Level 3 Diploma in Fabricating Steel Structures in Construction
13
5 Understand health and safety legislation,
regulations and safe working practices
and procedures
5.1 Explain the requirements of health and
safety legislation
5.2 Explain the purpose and nature of risk
assessments, method statements and
permit to work systems, and the relevance
of local procedures and guidance notes
5.3 Describe the hazards and risks that can arise
from shaping operations
5.4 Describe reporting lines and procedures
6 Understand work area, material and
equipment preparation and
reinstatement requirements for shaping
components of fabricated steel
structures by material removal using
hand tools
6.1 Describe methods and requirements for
preparation and reinstatement of work
area, material and equipment
6.2 Explain the consequences of incorrectly
preparing or reinstating the work areas,
material and equipment
6.3 Describe the types of equipment used for
shaping components and explain the care
and control procedures
7 Understand the tools, terminology,
techniques and practices for shaping
components of fabricated steel
structures by material removal using
hand tools
7.1 Explain the principles, uses and conventions
of engineering drawings and specifications
7.2 Describe the tools and techniques necessary
to carry out shaping components
7.3 Describe types and application of hand and
powered tools
7.4 Explain compliance checking methods and
techniques
7.5 Describe how to identify defects in products
and assets
7.6 Explain reporting documentation and
control procedures
ProQual, April 2018
Level 3 Diploma in Fabricating Steel Structures in Construction
14
Unit T/616/9736
Assemble components of steel fabrications to meet specification in
construction
Learning Outcome – The learner will: Assessment Criterion – The learner can:
1 Work safely and minimise risk at all times 1.1 Identify a range of hazards
1.2 Take appropriate action to minimise the risk
from hazards
1.3 Refer safely related matters to appropriate
persons as required
1.4 Work in accordance with relevant health
and safety legislation
1.5 Work in accordance with the requirements
of risk assessments and permit to work
systems
2 Prepare work area, materials and
equipment
2.1 Ensure that the work environment is
suitable for the work activities to be
undertaken
2.2 Ensure that service supplies are connected
and ready for use
2.3 Ensure that consumables are as specified
and fit for purpose
2.4 Obtain and prepare the appropriate tools
and equipment and ensure they are in a safe
and useable condition
2.5 Ensure the materials are prepare to the
required procedure
2.6 Ensure completion of prepared in line with
organisational procedures
2.7 Deal promptly and effectively with problems
and report those that cannot be solved
3 Assemble components of steel
fabrications
3.1 Obtain and interpret relevant drawings and
specifications
3.2 Ensure the specified components are
available and meet quality standards
3.3 Use appropriate methods and techniques to
assemble the components in their correct
positions
3.4 Assemble the components using the
specified connectors and securing devices
3.5 Check the completed assembly to ensure
that all operations have been completed
and the finished assembly meets the
required specification
3.6 Deal promptly and effectively with problems
and report those that cannot be resolved
ProQual, April 2018
Level 3 Diploma in Fabricating Steel Structures in Construction
15
4 Carry out the necessary actions after
completing the assembling of
components of steel fabrications
4.1 Re-instate the work area to a safe condition
and correctly dispose of waste materials
4.2 Shut down the equipment to a safe
condition on completion of steel fabrication
activities
4.3 Store re-usable consumables and
equipment in accordance with appropriate
procedures
4.4 Clearly identify the stored resources
4.5 Complete all necessary documentation
5 Understand health and safety legislation,
regulations and safe working practices
and procedures
5.1 Explain the requirements of health and
safety legislation
5.2 Explain the purpose and nature of risk
assessments, method statements and
permit to work systems, and the relevance
of local procedures and guidance notes
5.3 Describe the hazards and risks that can arise
from steel fabrications operations
5.4 Describe reporting lines and procedures
6 Understand work area, material and
equipment preparation and
reinstatement requirements for
assembling components of steel
fabrication activities
6.1 Describe methods and requirements for
preparation and reinstatement of work
area, material and equipment
6.2 Explain the consequences of incorrectly
preparing or reinstating the work areas,
material and equipment
6.3 Describe the types of tools and equipment
used for steel fabrication activities and
explain the care and control procedures
7 Understand the tools, terminology,
techniques and practices for assembling
components of steel fabrications
7.1 Explain the principles, uses and conventions
of engineering drawings and relatedspecifications
7.2 Describe preparation and methods
7.3 Explain assembly methods and techniques
7.4 Describe compliance methods and
techniques
7.5 Describe how to identify defects in products
and assets
7.6 Describe compliance checking methods and
techniques
7.7 Describe quality control procedures and
documentation procedures
ProQual, April 2018
Level 3 Diploma in Fabricating Steel Structures in Construction
16
Unit A/616/9737
Manually form components to specification in construction
Learning Outcome – The learner will: Assessment Criterion – The learner can:
1 Work safely and minimise risk at all
times
1.1 Identify a range of hazards
1.2 Take appropriate action to minimise the
risk from hazards
1.3 Refer safely related matters to
appropriate persons as required
1.4 Work in accordance with relevant health
and safety legislation
1.5 Work in accordance with the
requirements of risk assessments and
permit to work systems
2 Prepare work area, materials and
equipment
2.1 Ensure that the work environment is
suitable for the work activities to be
undertaken
2.2 Ensure that service supplies are
connected and ready for use
2.3 Ensure that consumables are as specified
and fit for purpose
2.4 Obtain and prepare the appropriate tools
and equipment and ensure they are in a
safe and useable condition
2.5 Ensure the materials are prepare to the
required procedure
2.6 Ensure completion of prepared in line
with organisational procedures
2.7 Identify and resolve straight forward
problems and report those that cannot be
solved
3 Manually form components to
specification
3.1 Follow relevant specifications for the
component to be produced
3.2 Determine what has to be done and how
this will be achieved
3.3 Use the appropriate tools and equipment
for the pressure shaping operation
3.4 Shape materials to the required
specification using appropriate methods
and techniques
3.5 Check that all the required shaping
operations have been completed to the
required standard
3.6 Deal promptly and effectively with
problems and report those that cannot
be resolved
ProQual, April 2018
Level 3 Diploma in Fabricating Steel Structures in Construction
17
4 Carry out the necessary actions after
completing the manually forming
components to specification
4.1 Re-instate the work area to a safe
condition and correctly dispose of waste
materials
4.2 Shut down the equipment to a safe
condition on completion of steel
fabrication activities
4.3 Store re-usable consumables and
equipment in accordance with
appropriate procedures
4.4 Clearly identify the stored resources
4.5 Complete all necessary documentation
5 Understand health and safety
legislation, regulations and safe working
practices and procedures
5.1 Explain the requirements of health and
safety legislation
5.2 Explain the purpose and nature of risk
assessments, method statements and
permit to work systems, and the
relevance of local procedures and
guidance notes
5.3 Describe the hazards and risks that can
arise from steel fabrication operations
5.4 Describe reporting lines and procedures
6 Understand work area, material and
equipment preparation and
reinstatement requirements for
manually forming components to
specifications
6.1 Describe methods and requirements for
preparation and reinstatement of work
area, material and equipment
6.2 Explain the consequences of incorrectly
preparing or reinstating the work areas,
material and equipment
6.3 Describe the types of equipment used for
moving loads and explain the care and
control procedures
7 Understand the tools, terminology,
techniques and practices for manually
forming components to specification
7.1 Explain the principles, uses and
conventions of engineering drawings and
related specifications
7.2 Describe hand forming methods and
techniques
7.3 Describe material characteristics and
their impact on hand forming operations
7.4 Describe quality control procedures and
recognition of defects which may be
caused by pressure forming process
7.5 Describe compliance checking methods
and techniques
7.6 Explain reporting documentation and
control procedures
ProQual, April 2018
Level 3 Diploma in Fabricating Steel Structures in Construction
18
Unit F/616/9738
Join materials by manually controlled welding process in
construction
Learning Outcome – The learner will: Assessment Criterion – The learner can:
1 Work safely and minimise risk at all times 1.1 Identify a range of hazards
1.2 Take appropriate action to minimise the risk
from hazards
1.3 Refer safely related matters to appropriate
persons as required
1.4 Work in accordance with relevant health
and safety legislation
1.5 Work in accordance with the requirements
of risk assessments and permit to work
systems
2 Prepare work area, materials and
equipment
2.1 Ensure that the work environment is
suitable for the work activities to be
undertaken
2.2 Ensure that service supplies are connected
and ready for use
2.3 Ensure that consumables are as specified
and fit for purpose
2.4 Obtain and prepare the appropriate tools
and equipment and ensure they are in a safe
and useable condition
2.5 Ensure the materials are prepare to the
required procedure
2.6 Ensure completion of prepared in line with
organisational procedures
2.7 Identify and resolve straight forward
problems and report those that cannot be
solved
3 Join materials by manually controlled
welding process
3.1 Follow the relevant joining procedure and
job instructions
3.2 Ensure that the joint preparation complies
with the specification
3.3 Ensure that joining and related equipment
and consumables are as specified and fit for
purpose
3.4 Make joints as specified using the
appropriate welding techniques
3.5 Produce joints of the required quality and of
specified dimensional accuracy
3.6 Shut down equipment to a safe condition on
completion of joining activities
3.7 Deal promptly and effectively with problems
and report those that cannot be resolved
ProQual, April 2018
Level 3 Diploma in Fabricating Steel Structures in Construction
19
4 Carry out the necessary actions after
completing the joining materials by
manually controlled welding process
4.1 Re-instate the work area to a safe condition
and correctly dispose of waste materials
4.2 Shut down the equipment to a safe
condition on completion of steel fabrication
activities
4.3 Store re-usable materials, consumables and
equipment in accordance with appropriate
procedures
4.4 Clearly identify the stored resources
4.5 Complete all necessary documentation
5 Understand health and safety legislation,
regulations and safe working practices
and procedures
5.1 Explain the requirements of health and
safety legislation
5.2 Explain the purpose and nature of risk
assessments, method statements and
permit to work systems, and the relevance
of local procedures and guidance notes
5.3 Describe the hazards and risks that can arise
from steel fabrication operations
5.4 Describe reporting lines and procedures
6 Understand work area, material and
equipment preparation and
reinstatement requirements for joining
materials by manually controlled welding
process
6.1 Describe methods and requirements for
preparation and reinstatement of work
area, material and equipment
6.2 Explain the consequences of incorrectly
preparing or reinstating the work areas,
material and equipment
6.3 Describe the types of equipment used for
moving loads and explain the care and
control procedures
7 Understand the tools, terminology,
techniques and practices for joining
materials by manually controlled welding
process
7.1 Explain the principles, uses and conventions
of engineering drawings and related
specifications
7.2 Describe thermal joining processes and
equipment
7.3 Describe material handling, preparation and
finishing methods and techniques
7.4 Describe materials and their joining
characteristics
7.5 Describe equipment setting operating and
care procedures
7.6 Describe quality control and test procedures
for detection of defects in joints
ProQual Awarding Body
